Surface sealant based on an acrylic co-polymer of low molecular weight in organic solvents with special additives that increase resistance to scratching and graffiti.

APPLICATIONS

Our SEALANT FILTER is recommended for sealing concrete, cement, wood, etc surfaces anywhere where easy maintenance against graffiti is required.

If the surface has been painted, the paint will disappear immediately when wiped with a cloth or sponge soaked in our GRACIL CLEANER.

PROPERTIES

• Penetrates approximately 3 mm into the surface, sealing the natural pores in concrete, cement, etc.
• Prevents the penetration of: paint, scratches, dust, greases, water, etc.
• Provides great chemical resistance to acids, alkalis, organic solvents, etc.
• Gives surfaces greater resistance to rubbing and wear, preventing the forming of small cracks and splits that serve as the base for greater damage.

COVERAGE

Depends on the surface porosity: on average 3 m2 per litro in two coats.

METHOD OF USE

" Stir vigorously before use".

The surface must be completely clean and dry.

Apply a first coat as a primer, preferably by roller.

A second coat should be applied half an hour after the first to seal the surface completely.

Treatment should be made with thin, even coats to prevent trapping air which would later cause defects and possible blisters in the finish.