Complex and perfectly-balanced mix of modified cements and selected aggregates which, mixed with water, forms an ideal mortar for rendering all types of walls.

APPLICATIONS
Recommended for rendering façades or partitions, patios, bathrooms, interior walls, etc.

PROPERTIES

• Has great plasticity.
• Total waterproofing against rainwater.
• Excellent adherence to traditional building surfaces.
• Does not form cracks because there is no shrinkage during setting.
• Has good mechanical strength.
• Allows thinner layers than are normally needed (1 cm is sufficient), giving appreciable economy on well-finished walls while its high workability reduces application time.

COVERAGE
Depends on the conditions of the wall and the thickness of the rendering.
As a guide, some 20- 25 kg/m2 for renderings 1.5 cm thick.

METHOD OF USE
The support must be clean of dust and other dirt, especially materials that prevent sticking such as greases, oils, remains of paint, etc.
The surface should be slightly rough or textured.
Porous or absorbent surfaces must be moistened when the rendering is appl.

MORTAR PREPARATION: Add the following to the concrete mixer:
WATER- 4 litres.
REVICEM-R- 25 Kg
WATER- As necessary to achieve the required consistency.

METHOD OF APPLICATION : The mixed mortar is spread with wool on the support and left to set.
For thicknesses greater than 1.5 cm, it should be applied in two layers, the first thinner and the second when the first has set (at least one hour, depending on the temperature and humidity).

The mortar maintains its workability and can be applied for up to 1 hour after mixing..