Sealant especially designed for waterproofing based on acrylic dispersions or styrene acrylics since its water base does not cause chemical incompatibilities.

APLICACIONES

The PAVISEL-A water-based surface sealant is recommended for:

Finishing waterproofing using revimca waterproofing.

On walls: to seal concretes and mortars, penetrating through channels, as with traditional treatments.

PROPERTIES

• Gives surfaces greater resistance to rubbing and wear, increasing their durability.
• Seals pores, repelling water and dust, to leave a perfect satin finish.
• Makes the surface self-cleaning.
• Since it is water based, as with the waterproofing to which it is applied, it has the same elasticity and prevents the formation of small splits that give the surface a 'spider web' appearance.

COVERAGE

Following the instructions for use gives a coverage of 6 m2 per kg of product .

METHOD OF USE

FOLLOW THESE STEPS FOR A PERFECT FINISH:

1. The surface must be clean and dry.

2. Application of first coat: The product is used straight from the can and applied with a brush or roller onto the last coat of the fully dry waterproofing. Do not dilute in water since it will lose part of its properties.

3. A second coat may optionally be applied when the first is fully dry.