Water-based waterproofer whose main component is a synthetic acrylic styrene co-polymer. Once dry, it forms a layer that sticks strongly to the surface and is completely elastic. It penetrates deeply into cracks and hollows and follows expansion and contraction movements without splitting.

COLORS TO CHOOSE
RED, GREEN, GRAY, BEIG AND WHITE.

APPLICATIONS: revimca is the ideal product for waterproofing terraces, flat roofs, roofs, etc, in private houses, apartment blocks, hotel maintenance services, construction companies, etc. Has the following advantages compared to other application methods:

  • Low application cost.
  • Quick and simple application, without construction work or expensive or sophisticated tools.
  • Improves the appearance of surface finishes.
  • Is compatible with other waterproofing methods, so it can be used to repair old waterproofing.
  • The treated surface can be walked on. Can be applied before new flooring is installed.
  • Reduces fire risk since it has no solvents or tars, making it self-extinguishing.

PROPERTIES

  • Total waterproofing. Maximum resistance to traction. Chemical stability.
  • Great adherence and fitting to the supporting base, penetrating cracks and hollows. Great resistance: to rubbing and wear, to ultraviolet radiation (does not discolour or spoil).

 

COVERAGE
1.5 -2 kg of product per m2

METHOD OF USE

SURFACE PREPARATION:
Repair all hollows, cracks, etc in the surface to be waterproofed. Clean up dirt and leaves and wait until completely dry.

PRIMING:
Apply a first coat of waterproofing diluted with 20-25% water. Ensure that this priming penetrates all hollows and cracks in the surface. Apply with a brush or roller.

PLACING GLASS FIBRE:
Once the primer coat is dry to the tough, place the glass fibre cloth, gluing it to the primer with a coat of pure revimca.

FINISH:
Once the second coat has dried, apply one or two coats of pure revimca to achieve optimal results.